Detonator
Помогите как сабжевые драйвера настроить под
Linux, лучше те которые ввиде самораспаковыющегося
семитного скрипта. Интересует настройка конфига
под Иксы. Все устанавливается и загружаются
модули, а дальше то что?
ЗЫ Карточка GeForce 4 mx 440 c видеовыходом
ЗЗЫ Мандрйк 9.0
-*Название листа "Linux: разрешение вопросов, перспективы и общение"; Участников: 1096
Написать в лист: comp.soft.linux.discuss-list@subscribe.ru
Архив Листа - http://subscribe.ru/archive/comp.soft.linux.discuss Поиск: http://www.google.com
Адрес правил листа http://subscribe.ru/catalog/comp.soft.linux.discuss/rules
Номер письма: 4427; Возраст листа: 215
Адрес сайта рассылки: http://www.linuxrsp.ru
Адрес этого письма в архиве: http://subscribe.ru/archive/comp.soft.linux.discuss/msg/89221
-*Информационный канал Subscribe.Ru
Написать в лист: mailto:comp.soft.linux.discuss-list@subscribe.ru
Отписаться: mailto:comp.soft.linux.discuss--unsub@subscribe.ru
http://subscribe.ru/ mailto:ask@subscribe.ru
Здравствуйте, Сергей.
When XFree86 4.0 was released, it used a slightly different XF86Config
file syntax than the 3.x series did, and so to allow both 3.x and 4.x
versions of XFree86 to co-exist on the same system, it was decided that
XFree86 4.x was to use the configuration file "/etc/X11/XF86Config-4"
if it existed, and only if that file did not exist would the file
"/etc/X11/XF86Config" be used (actually, that is an over-simplification
of the search criteria; please see the XF86Config man page for a complete
description of the search path). Please make sure you know what
configuration file XFree86 is using. If you are in doubt, look for a
line beginning with "(==) Using config file:" in your XFree86 log file
("/var/log/XFree86.0.log"). This README will use "XF86Config" to refer
to your configuration file, whatever it is named.
If you do not have a working XF86Config file, there are several ways
to start: there is a sample config file that comes with XFree86,
and there is a sample config file included with the NVIDIA driver
package (it gets installed in /usr/share/doc/NVIDIA_GLX-1.0/).
You could also use a program like 'xf86config'; some distributions
provide their own tool for generating an XF86Config file. For more
on XF86Config file syntax, please refer to the man page.
If you already have an XF86Config file working with a different driver
(such as the 'nv' or 'vesa' driver), then all you need to do is find
the relevant Device section and replace the line:
Driver "nv"
(or Driver "vesa")
with
Driver "nvidia"
In the Module section, make sure you have:
Load "glx"
You should also remove the following lines:
Load "dri"
Load "GLcore"
if they exist. There are also numerous options that can be added to
the XF86Config file to fine-tune the NVIDIA XFree86 driver. Please see
Appendix D for a complete list of these options
--
1. Пepeд тeм, кaк улучшитcя, cитуaция уxудшaeтcя.
2. Kтo cкaзaл, чтo oнa улучшитcя ?..