STRUGGLING WITH EXPORTING NOTES DATA TO SPREADSHEETS? NO MORE! Try IntelliPRINT, The world's leading Reporting, Dashboards, and Analysis solution for Notes & Domino
Don't spend unproductive time maintaining different versions of the same spreadsheet
Preserve data integrity and security in multi-user environments
Create reports in minutes INSIDE Notes
Get freedom from iterative report requests, deliver self-serve capabilities
Experience Reporting, Dashboards, and Analysis INSIDE Notes!
Use this agent to quickly scan all the databases on your Lotus Domino server. You'll find out which databases you don't have access to, which aren't included in the directory catalog and more.
We got a letter from our electricity provider recently to say our bill was going up from 38 to 50 pounds a month. The week after I bought a ReadyNAS Duo to replace the five-year-old Dell PowerEdge server that's been sitting burning electricity in the cellar.
Although the PowerEdge started out as an Active Directory PDC, DNS server and the main Notes server time's have changed and it's now redundant. All it did in the end was act as a file server and spent 99.9% of its time doing nothing at all. The ReadyNas now does the file sharing while burning a lot of less power, offering RAID backup and has oodles more space (1.5TB!).
My never-ending quest for the ideal SOHO IT setup continues. As I do this it's inevitable that a pile of old kit would mount up. Here's mine:
As well as the PowerEdge there are two working IBM servers, a Dell Inspiron laptop (low-spec but works) and an IBM ThinkPad T42 (spare parts only). There's also quite a few old routers and other bits of kit I don't need.
I've put it all in the corner of the office to force me in to doing something with it other than hiding it all in cupboards or the cellar.
Having looked on eBay I can see I won't get much (if anything) for any of it. What I'd like to do is give it to a good home. Somebody who is in the same position I was in years ago and needs a server to put LAMP on to learn web development. All three servers are perfectly capable of running a small home web development server.
What I don't want to do is give it to some Freecycle lurker who would simply pedal it on at next Sunday's car boot. Ideally I want to give it to a charity who I think might make good use of it. Anybody know how I go about doing that?
You may have experienced problems where you have antivirus installed and some emails are in dead state in your mail.box. This is in many cases because you have an antivirus and another product (like a disclaimer installed). IBM should do a better job to fix this. Here is a detailed explanation and a proposal: http://doctorapi.blogspot.com/2009/12/ibm-should-provide-better-extension.html
The appearance icons of database in replicator is unpredictable, there are constantly the databases, that I do not need for replicate, sometimes it is impossible to remove them, and restore the deleted icons than to re-creating a replica fails. Using replicator uncomfortable ... Usually people start replication on RightClick on the icon of the database. I do not know a single person who used it.
I propose to add icons database to Replicator, sorting them into folders, delete, manually! If want to replicate, I would have went into the Replicator, tick database and replicated them - it would be very convenient!
The appearance icons of database in replicator is unpredictable, there are constantly the databases, that I do not need for replicate, sometimes it is impossible to remove them, and restore the deleted icons than to re-creating a replica fails. Using replicator uncomfortable. Usually people start replication on RightClick on the icon of the database. I do not know a single person who used it.
I propose to add icons database to Replicator, sorting them into folders, delete, manually! If want to replicate, I would have went into the Replicator, tick database and replicated them - it would be very convenient. It would be a real dashboard for replication!
I propose to display a list of elements of the container "Forms", "Views" and so on, with a SingleClick, rather than with a Double, as now. DoubleClick must display the elements on the right and to open the list of containers in the view, as it did in previous versions of Domino Designer.
EDITED: Mean clicking on the label "Forms", etc... but not on "+".
In order to save some space on the workspace for more, but more readable icons, I suggest to place the Application Icon as a background for the Application tile. The font color for DBTitle and Servername thus should be adjustable, e.g. in the ICON-Properties. Furthermore, for better results, we should be able to import any type of picture (OK, JPG) in a certain size into the Application ICon. The cool guy of lotus would suggest of course a font color extremely readable based on the image color family.
In order to save some space on the workspace for more, but more readable icons, I suggest to place the Application Icon as a background for the Application tile. The font color for DBTitle and Servername thus should be adjustable, e.g. in the ICON-Properties. Furthermore, for better results, we should be able to import any type of picture (OK, JPG) in a certain size into the Application ICon. The cool guy of lotus would suggest of course a font color extremely readable based on the image color family.
To unify the use of code and design elements (Subform) is sometimes useful to know we are in dialogue or not. Example: Subform used as embedded (checking for filling in the fields needed on QuerySave) and as a dialogue (on QueryClose).
I propose to add a property IsDialog as Boolean to NotesUIDocument class.
This restriction exists for the following methods NotesUIWorkspace class: PickListCollection, PickListStrings, Prompt, URLOpen, EditDocument, SaveFileDialog, OpenFileDialog. Its meaning is not clear, because DialogBox "allowed", and he calmly executed?!
I propose to remove this restriction, without him it will be very convenient to choose something, but, for example, if you cancel in the dialog you can Continue assign False (on QueryOpen), that is, not execute code in the QueryOpen of all Subforms, and thus not open the document generally.
Depending on any conditions with URLOpen and EditDocument can be quickly and conveniently open a document by another form.
This restriction exists for the following methods NotesUIWorkspace class: PickListCollection, PickListStrings, Prompt, URLOpen, EditDocument, SaveFileDialog, OpenFileDialog. Its meaning is not clear, because DialogBox allowed, and he calmly executed?!!
I propose to remove this restriction, without him it will be very convenient to choose something, but, for example, if you cancel in the dialog you can Continue assign False (on QueryOpen), that is, not execute code in the QueryOpen of all Subforms, and thus not open the document generally. Depending on any conditions with URLOpen and EditDocument can be quickly and conveniently open a document by another form.
This is the second of a series of three
IP-related blogs. Yesterday I discussed the process of moving Projects
into the Catalog. Tomorrow will be about the GPL Catalogue. And
today some thoughts on the Lotus Awards. As you ...
If you have the Notes-only client installed and you're working in a database (your inbox or any app) and you choose "View Agents", the Notes client opens an Agent list. From there, you can run, enable/disable agents easily.... and QUICKLY.
If you have Notes/Designer/Admin 8.5+ installed, and you're working in a database (your inbox or any app) and you choose "View Agents", it cranks up DDE. Working on a remote server, DDE can take a signifcant amount of time to open and make the agent list available.
That's what "View > Design" is for.
I've always used "View > Agents" to quickly open & run/enable/disable agents.
I'd like to see "View > Agents" open the same Notes-client agent list for both Notes-only installs and Notes/DDE installs.
If you have the Notes-only client installed and you're working in a database (your inbox or any app) and you choose "View Agents", the Notes client opens an Agent list. From there, you can run, enable/disable agents easily.... and QUICKLY.
If you have Notes/Designer/Admin 8.5+ installed, and you're working in a database (your inbox or any app) and you choose "View Agents", it cranks up DDE. Working on a remote server, DDE can take a signifcant amount of time to open and make the agent list available.
That's what "View > Design" is for.
I've always used "View > Agents" to quickly open & run/enable/disable agents.
I'd like to see "View > Agents" open the same Notes-client agent list for both Notes-only installs and Notes/DDE installs.
And a built in behaviour for the print-screen should be provided to also disable it... anyway the user can take a photo of the screen but at least you reduce the possibilities.
It would be great if you could select the cells and set this property on all the cells in one click. Just like you can do when setting the cell-color or the cell image source.
Now you have to set each cell individually, which is quite al lot of clicking.
When you select more cells the property gets set on the last selected cell.
In Recent the ideas are sorted by date where the ideas are created.
In Popular they are sorted by votes, so are ideas from 2007 are on the top of the view.
The Sorting would be better when ideajam would use a calculated ranking.
For example, use the votes and substract the age in days the idea is.
When trying to embed a view, the dialog uses the user's list of bookmarks. This is an issue when the user does not have a bookmark to the desired database.
Furthermore, when the developer has a bookmark for both a production and development version of the db, there is no way to differentiate them.
I propose to stop using the bookmark list and allow the user to browse to the required db, then pick the view
If we could ad a tab in connections as start page where communication department can publish content, we could offer Connections as a whole intranet to smaller organisations, put presure on Sharepoint and other content tool vendors
Have a site like MyIdeas.com that you could have seasonal or other categories. Like the worst Christmas songs, best superbowl, worst football team (Chiefs), best health care solution etc.
It would show that the product can be more the Lotus oriented.
"Block Mail from Sender" blocks any addresses partially matching a blocked email address. This issue has been reported to Quality Engineering as SPR# DADS6RKH97. The issue is related to the usage of the @Contains function to perform the check. The function is working as designed, but the overall formula check needs revision to avoid the partial match case observed.
After you install Notes, errors such as the following occur when you attempt to start it: "This software has encountered a problem and needs to close." and "Failed to login. CLFRJ0010E: Notes initialization failed."
Configuring Alloy for server clustering and Web services call failover Alloy⢠by IBM® and SAP® provides server clustering and failover support in a Lotus Notes and Domino environment. In this configuration, the Alloy server installation program is run on each participating Domino (Alloy) server ...