Модем GM56PCI-LA
Я установил драйвер так как вы говорили, но на одном из этапов установки в одном
из устанавлиемых (XXXX.ko) файлов происходит ошибка(failed)
Вот весь ход установки после тех команд которые вы сообщили мне. Ошибку я выделил
знаком[root@localhost root]# cd ltmodem-8.31a10
[root@localhost ltmodem-8.31a10]# ./build_module
Lucent/Agere_Systems(AS) DSP chip modems (but Not the AMR or soft PCI chi
are supported by the the resources of this kit.
AS maintainer S. Sarkar develops the code on a Red Hat Linux test bed.
The lt_serial.o Serial Interface module comes under GPL and is Open Sourc
The lt_modem.o code is entirely proprietary, though partially Open Source
Adaptation to ongoing changes in Linux source code is enabled by the Opene components.
Critical AS proprietary information is pre-complied in ltmdmobj.o,
whose constituents are functionally not affected by minor Linux source conges.
Volunteer maintainers periodically receive code updates from AS.
Through the contributions of Many described in CREDITS, there are
enhancements in utility, ease of installation and documentation.
Mark Spieth initiated this ltmodem compiler kit series.
Chris Hebeisen introduced the Configure implementation, bringing Newbie finess.
Marv Stodolsky is culpable for the verbose messaging.
Within DOCs/, Ltmodem.html has URLs to many particular usage cases.
Volunteers assemble the ltmodem-version.deb and
ltmodem-version.rpm Installers for the User Community as Linux source codves
utiliizing the resources of this compiler kit series.
If new to compiling, read the ModemCompiling.txt which is being output, te
proper set up your kernel-sources. The kernel-source package as installed
NOT in general match an installed kernel, but one of several alternative s.
Thus with a niave usage, all could be completed well technically.
BUT the installed drivers might not be compatible with your kernel,
of even reside in the needed /lib/modules/Kernel_Version/ tree.
To continue, Enter
This compilation process is likely Not necessary to work through,
if the only need is modem drivers matching the standard kernel of the
following Linux distributions: Debian, Red Hat, Mandrake, SuSE and Connec
Volunteers have already compiled most standard drivers. For more current es,
those available compatible with your System requirements will be later li
They are available for download as ltmodem-version.rpm and
ltmodem-version.deb Installers from a repository, http://ltmodem.heby.de
If your System can use one of these Installers, you will be informed belo
Many installers for older kernels are available at:
http://linmodems.technion.ac.il/packages.html
The compiling process is a learning experience for Newbies.
We strongly recommend that you DO learn it sometime.
But getting on the Internet under Linux should have first priority.
This kit provides several diagnostics aids and good documentation.
Continuing will do no harm. Useful diagnostic information
on your system will be written to BLDrecord.txt,
with direction to documentation if a failure occurs.
At a minimum, Do keep the DOCs/ and utils/ folders and become familiar
with the resources therein.
To continue: Enter
This is the version 8.31a10 of the compiler + installer kit
8.31 corresponds to the version of the core Agere Systems DSP c
a10 designation that follows reflects NO improvement in DSP c
Rather peripheral driver, added diagnostics and installer improvements
are reflected. They are progressively implemented as Users report proble
or the Linux kernel evolves.
The modem drivers will serve with Linux kernels beginning with 2.2.2, thent
2.4.nn series, and the 2.5.nn development kernels.
However support was broken in the early 2.4.n-test series.
When there is a Red Hat 2.6.nn release, AS will then update the code
If your PC is being well served with this 8.31a10,
there is NO Benefit in using a more recent version
until there is an update in the Agere driver code, say 8.26 to 9.00.
But if the driver installation for a new kernel should in some way fail,
please do download the most recent ltmodem-VER.tar.gz
before sending a query to discu***@l*****.org,
because the problem may already be solved.
This build_module script only compiles drivers,
with their installation managed by subsequent commands.
Thus ./build_module can be rerun for education or amusement,
without as yet committing changes to your System.
For general instructions: Enter
All should work automatically for most Linux installations/distributions,
IF a complete kernel-headers/ folder is available:
through a symbolic link: /lib/modules/KernelVersion/build --> PATH_nel-headers/
at the classical /usr/src/ position.
Otherwise a symbolic link will be necessary:
ln -s PATH_to/kernel-headers/ /usr/src/linux
Read ModemDriverCompiling.txt if an explanation is needed about kernel-he
To compile modules for a kernel other version than 2.6.3-7mdk, such as ve2.2.17-3test,
use syntax:
./build_module 2.2.17-3test
where the version.h in the kernel-headers/ folder has 2.2.17-3test
If desirable to make a record for trouble shooting purposes,
Abort with Ctrl-C. Then the process can be recorded to ltrecord.txt :
./build_module | tee ltrecord.txt
To continue: Enter
Diagnostic information is progressively being written to BLDrecord.txt .
Often, contents of BLDrecord.txt will aid in solving a problem.
The Linux distribution is: mandrake, Mandrake Linux release 10.0 (Officir i586
End of distribution check.
UPDATE=2004_Nov_13
Providing detail for device at PCI_bus 02:02.0
with vendor-ID:device-ID
----:Class 0780: 11c1:044c Communication controller: Lucent Microelectronics Modem
(rev 02)
SubSystem 11c1:044c Lucent Microelectronics LT WinModem
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at dfefff00 (32-bit, non-prefetchable) [size=256]
I/O ports at cc00 [size=8]
Checking PCI IDs through chipset providers and modem assemblers The modem has a supported Lucent/Agere DSP (digital signal processing) ch
with primary PCI_ID: 11c1:044c
DSP=1
To continue: Enter
Checking for any preliminary complications.
Bad links to /usr/include not evident.
The kernel supports only single processor motherboards.
To continue: Enter
OK thus far.
To begin acquisition of compiling information: Enter
Removing old makings and expanding a clean source.tar.gz
Setting BLDrecord.txt link within source/ folder.
lrwxrwxrwx 1 root root 16 Янв 4 18:06 BLDrecord.txt -> ../BLDrecord.txt
Setting ./tmpfile link within source/ folder.
lrwxrwxrwx 1 root root 12 Янв 4 18:06 ./tmpfile -> .././tmpfile
Following a successful check for matching kernel-headers,
the modem drivers will be compiled for the current kernel version: 2.6.3-7
To start resource tests: Enter
Performing a configure trial and capturing the report to ../conf-report.tx
Parsing the report:
No evident problems.
creating cache ./config.cache
Checking OS
Checking machine type
Processor i686 is supported.
checking for gcc... gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
Checking gcc major version 3
Checking for rpm build... rpmbuild
checking for a BSD compatible install... /usr/bin/install -c
checking for make... yes
checking for ld... yes
Checking for kernel headers
... in /usr/src/linux: Kernel headers found in /usr/src/linux
... in /usr/src/kernel-headers-2.6.3-7mdk: nope
... in /usr/src/linux-2.6.3: nope
... in /usr/src/linux-2.6.3-7mdk: Kernel headers found in /usr/src/linux-7mdk
... in /lib/modules/2.6.3-7mdk/build: Kernel headers found in /lib/modul.3-7mdk/build
using /lib/modules/2.6.3-7mdk/build
Checking kernel header version
kernel headers are version 2.6.3-7mdk
RPM will require kernel-2.4.25.2mdkkernel-2.6.3.7mdk = 2.6.3-7mdk
has irq_spinlock in async_struct 0
checking for fakeroot... no
+| will have to be root. Otherwise this won't affect you.
+updating cache ./config.cache
creating ./config.status
creating Makefile
creating ltinst2
creating Makefile.2.6
creating autoload
creating cleanup
creating ltmodem.spec
The check for compilation tools and general resources was successful.
Within DOCs/ there is an annotated conf-report.txt
The Makefile and down steam installation scripts have been created.
To continue:
Enter
Next checking utilty versions,
Version_min
Utility or range for kernels
name 2.2.16 2.4.18 Actual_version
Gnu C 2.7.2.3 2.95.3-2.9.99 3.3.2
Gnu make 3.77 3.79.1 3.80
binutils 2.8.1.0.23 2.9.1.0.25 2.14.90.0.7
The gcc compiler resources available are:
lrwxrwxrwx 1 root root 21 Янв 4 2005 /usr/bin/gcc -> /etc/alternatic
-rwxr-xr-x 1 root root 84684 Фев 13 2004 /usr/bin/gcc-3.3.2
-rwxr-xr-x 1 root root 23 Фев 13 2004 /usr/bin/gcc3.3-version
with your System currently using version 3.3.2
Do NOT mix the major versions of compilers for the kernel and modem drive
or your System will crash! The following releases are using gcc version 3
Mandrake 9, Redhat 8 and SuSE 8.1 in November 2002.
To continue:
Enter
To begin compilation of lt_modem.o and lt_serial.o, Enter
To avoid faulting Systems with an Enviromental setting: make -e
make
is the compiling command used with build_module.
To modify "make" invocation on your System, if desirable,
edit the build_module line below: MAKEE
Makefile:76: *** пропущен разделитель. Останов.
Checking for driver products:
Compilation of lt_modem.ko failed,
Do assess whether your utilities are up to date as listed within 1ST-READ!
Read Compile_properly.txt from DOCs/.
If you cannot solve the problem, send BLDrecord.txt to: discuss@linmodems.
[root@localhost ltmodem-8.31a10]#
-*Название листа "Linux: разрешение вопросов, перспективы и общение";
Написать в лист: mailto:comp.soft.linux.discuss-list@subscribe.ru
Адрес правил листа http://subscribe.ru/catalog/comp.soft.linux.discuss/rules
Номер письма: 14766; Возраст листа: 528; Участников: 1301
Адрес сайта рассылки: http://www.linuxrsp.ru
Адрес этого письма в архиве: http://subscribe.ru/archive/comp.soft.linux.discuss/msg/291116
-*Информационный канал Subscribe.Ru
Подписан адрес:
Код этой рассылки: comp.soft.linux.discuss
Написать в лист: mailto:comp.soft.linux.discuss-list@subscribe.ru
Отписаться: mailto:comp.soft.linux.discuss--unsub@subscribe.ru?subject=comp.soft.linux.discuss
http://subscribe.ru/ http://subscribe.ru/feedback
В сообщении от 1104855769 секунд после начала Эпохи Unix Вы написали:
одном
Вот `ltmodem-source-8.31a10.patch' как раз и устраняет эту ошибку.
Вы наложили патч? Были ошибки при выполнении
# patch -p1 <../../ltmodem-source-8.31a10.patch
?