Отправляет email-рассылки с помощью сервиса Sendsay

TV tuner on philips 7134

Привет всем.

Собственно, имеем сабж. С коробки известно, что это Compro VideoMate TV/FM PAL
BG+DK.
Имеет TV, FM, IR.
В идеологически неправильной системе все работает.

Изучал сей документ:
http://gentoo-wiki.com/HARDWARE_saa7134

Теперь генезис.

dmesg:
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) ->
IRQ 209
saa7134[0]: found at 0000:05:07.0, rev: 1, irq: 209, latency: 32, mmio: 0xd0000000
saa7134[0]: subsystem: 185b:c200, board: Compro VideoMate Gold+ Pal [card=49,autodetected]
saa7134[0]: board init: gpio is 4c0000
saa7134[0]: i2c eeprom 00: 5b 18 00 c2 ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
: chip found @ 0xc0 (saa7134[0])
: All bytes are equal. It is not a TEA5767
tuner 3-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
: chip found @ 0xc2 (saa7134[0])
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) ->
IRQ 217

Вроде все правильно определил. Но где IR?

$ tvtime-scanner
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/mat/.tvtime/tvtime.xml
Scanning using TV standard SECAM.
/home/mat/.tvtime/stationlist.xml: No existing SECAM station list "Custom".
Scanning from 44,00 MHz to 958,00 MHz.
Found a channel at 188,50 MHz (188,25 - 188,50 MHz), adding to channel list.
Found a channel at 224,00 MHz (223,75 - 224,00 MHz), adding to channel list.
Found a channel at 243,00 MHz (242,75 - 243,00 MHz), adding to channel list.
Found a channel at 257,50 MHz (257,25 - 257,50 MHz), adding to channel list.
Found a channel at 292,50 MHz (292,25 - 292,50 MHz), adding to channel list.
Found a channel at 587,50 MHz (587,25 - 587,50 MHz), adding to channel list.
Found a channel at 625,00 MHz (624,75 - 625,00 MHz), adding to channel list.
Found a channel at 666,00 MHz (665,75 - 666,00 MHz), adding to channel list.
Found a channel at 672,75 MHz (672,50 - 672,75 MHz), adding to channel list.
Found a channel at 718,00 MHz (717,75 - 718,00 MHz), adding to channel list.
Found a channel at 757,00 MHz (756,75 - 757,00 MHz), adding to channel list.
Found a channel at 778,50 MHz (778,25 - 778,50 MHz), adding to channel list.
Found a channel at 831,25 MHz (831,00 - 831,25 MHz), adding to channel list.
Found a channel at 832,00 MHz (831,75 - 832,00 MHz), adding to channel list.

Теперь запускаю tvtime, выбираю custom channel list - все каналы молчат.

Плагин FM Radio Player к xmms тоже молчит, крутил алсу как мог (звук с тюнера
подается шнурком на линейный вход звуковушки).

$ scantv
...
[global]
freqtab = russia

[defaults]
input = Television
norm = SECAM
...

Не нашел ничего.

Как это все завести, вроде бы же детектится?

Ответить   Matvey Sat, 26 Nov 2005 22:58:36 +0200 (#481082)